Pembroke · Plymouth County
Cold radiators, a furnace in lockout, or a heat pump quote in Pembroke? Tell us what's happening and get connected with an independent HVAC contractor who works in Pembroke.
Pembroke, Massachusetts
Pembroke's population more than doubled during the 1960s, rising from 4,919 to 11,193, and the 2019 Housing Production Plan counts about 54 percent of the town's homes as built after 1969. That makes a typical Pembroke heating system younger than the ones in older South Shore cities, but a house from that building wave can easily be on a replacement furnace or boiler by now, and its owner may be weighing a heat pump for the next one.
Before any of that: a carbon monoxide alarm or a gas smell means you go outside first. From the driveway or a neighbor's porch, call 911 or the Eversource gas emergency line, and wait for responders before going back in.
South Shore HVAC Finder doesn't install or repair equipment. We connect Pembroke homeowners with independent heating and cooling businesses, and this page explains what's particular about heating and cooling a house here, from which utilities serve the town to how permits are filed.
Local knowledge
A few Pembroke specifics change how a heating or cooling job is planned and permitted.
Two Electric Companies
State utility listings show both Eversource and National Grid delivering electricity in Pembroke, and the town has no municipal light plant. Check the name on your electric bill before chasing heat pump offers, because the Mass Save sponsor for your address follows that company.
Source: Mass.gov utility listings
Eversource Gas
Where gas mains reach a street, the supplier is Eversource Gas Company of Massachusetts. Homes off the mains heat with something else, so ask a contractor whether gas is even an option for your address before pricing a conversion.
Source: Mass.gov utility listings
Online Permits
Pembroke's Building and Inspectional Services takes building, electrical, sheet metal, plumbing, and gas permits through its Simplicity online system, and every application needs a Workers' Compensation Affidavit. A new furnace, duct run, or heat pump circuit can involve more than one of those permits.
Source: Town of Pembroke
Mapped Floodplain
The 2019 Housing Production Plan puts about 2,705 acres of Pembroke in the 100-year floodplain and another 237 acres in the 500-year floodplain. Near the North River, the Indian Head River, and the town's many ponds, ask where an outdoor unit or basement boiler would sit relative to high water.
Source: Town of Pembroke
CO Check At Sale
When a Pembroke home changes hands, the Fire Department inspects smoke and carbon monoxide detectors for the closing, and the certificate is good for 60 days. If you're replacing a fuel-burning system around a sale, plan the work so the alarms are in place before that visit.
Source: Pembroke Fire Department
Services
Independent contractors who serve Pembroke handle the work below. Each note connects the service to how homes in town are built, powered, and permitted.
Hire smart
Massachusetts has no single HVAC license. Gas work needs a gas fitter license, oil burner work a Department of Fire Services certificate, ductwork a sheet metal license, and larger refrigeration systems a refrigeration technician license. Most heating and cooling installs need a town permit.
Massachusetts splits heating and cooling work among several licenses: gas fitter for gas piping and appliances, sheet metal for ductwork, and an oil burner certificate from the Department of Fire Services for oil equipment. Look each one up on the state's occupational license search or the DFS verification site. Source
Permits come from Building and Inspectional Services at Town Hall, 100 Center Street, and are filed through the Simplicity portal. Ask the contractor to pull the gas, sheet metal, or electrical permit in their name and include the Workers' Compensation Affidavit. Source
The Building Department books inspections for the next day or the earliest open slot. Ask the contractor who will be on site and whether you need to be home to give the inspector access. Source
Many Pembroke houses have had new windows, insulation, or additions since they were built. Ask for sizing based on the house as it stands now rather than on the label of the old unit.
A written estimate should list the equipment model, permits, removal of the old system, and any Mass Save offer the contractor expects you to qualify for, plus who submits the rebate paperwork. Source
Costs
Fuel and equipment type drive the biggest differences. Replacing a gas furnace with another gas furnace is a smaller job than moving an oil-heated house to a heat pump, which can bring an electrical upgrade, new line sets, and removal of an oil tank. A house on a street without gas mains has fewer options to compare.
Access and site conditions add labor. A crawlspace furnace, a long refrigerant run to the far side of a single-story house, or a basement that floods and needs equipment raised all take time. Get written estimates from more than one contractor and compare the scope line by line, not only the bottom number.
Neighborhoods and nearby
Contractors who serve Pembroke work from Bryantville to North Pembroke and around the Town Green. Many also cover the neighboring towns of Hanson, Hanover, Duxbury, and Kingston.
Questions
Still not sure? Send a short request and a local pro can answer the specifics.
Ask what's included: the number of indoor units, any electrical panel work, permits, and whether the old system stays as backup. Ask the contractor which Mass Save offers they expect to apply. Compare written estimates from at least two contractors who work in Pembroke.
That depends on the contractor's schedule and whether the part is on hand. When you call, you'll be connected with an independent local HVAC contractor who can give you their own timing. If there's a CO alarm or a gas odor, leave and call 911 first.
Building and Inspectional Services at Town Hall issues gas, sheet metal, electrical, and building permits through the Simplicity online system. The contractor normally files the permit and schedules the inspection.
Pembroke is served by Eversource and National Grid for electricity, not a municipal light plant, and both companies sponsor Mass Save. Offers change, so check Mass Save for your address or ask the contractor to confirm before you sign.
Yes. A smoke and carbon monoxide detector inspection is required for the closing, and the certificate is valid for 60 days. Schedule it with the fire station at 172 Center Street.
No. We're a referral service that connects you with independent HVAC businesses serving Pembroke. You hire and pay the contractor directly, and you never owe us anything for asking.
Get connected
Share a few details and an independent local HVAC contractor who serves your town can follow up about the job. There’s no charge to use this site, and you decide whether to hire anyone.
Prefer to talk? Calling is the fastest way to reach a local HVAC contractor.
Call Now